The Wotofo SRPNT RDA is the newest member of the “Serpent” family…
What To Expect From The Wotofo SRPNT RDA?
The main standout feature of this RDA is the deck style.
This is suitable for single or dual coil builds.
In single coil configuration you can use coils of up to 5mm inside diameter – which provides a larger surface area for vaporising e-liquid. You even get one of these included in the kit!
Also there are 4 clamp posts which should take care of whatever direction your coil legs are pointing.
In dual coil configuration you can use coils of up to 3mm inside diameter – again giving a decent amount of surface area. You get 2x 3mm coils also included in the kit.
Not only do you get coils but you also get cotton wicks for both coil types in the kit!
The cut out areas below the clamps allow for easy coil installation by just sliding the legs into the slot.
The airflow is adjustable by rotating the top cap.
The airflow enters through the 4 holes in the outer barrel and then by turning the top cap you can reduce or increase the amount flowing to the side of the coil/s.
There are 3 different airflow inlets – 4×1.9mm holes, 4×1.6mm holes or 2×1.9mm holes to tailor the airflow to your preference.
A resin 810 drip tip is also included in the kit.
There are 6 colours to choose from: Black, Stainless Steel, Gunmetal, Blue, Gold and Rainbow.
1* SRPNT RDA
1* 5mm ID Dual Core Fused Clapton 0.65Ω
1* 5mm Thick Cotton Strip
1* 3mm ID Framed Staple Clapton 0.33Ω 2pcs
1* 3mm Thick Cotton Strip 2pcs
1* Cross Head Screwdriver
1* Allen Key
1* Accessory Bag
1* User Manual
Size : 24*22.7mm(without drip tip & 510 pin)
Drip Tip: 810 resin drip tip
Material: Stainless Steel&German PEEK
Coil Type: Wire coil
Coil Config: 3mm ID dual coils / 5mm ID single coil
Juice Feeding Method: Drip
Threading: 510
Let me know what you think of the Wotofo SRPNT RDA in the comments below!