The Wotofo Profile Squonk Mod is another release in the “Profile” range – again in collaboration with MrJustRight1.
There have been many products which wear the “Profile” badge including the original Profile RDA, Profile Unity RTA, Profile 1.5 RDA, Profile RDTA and the Profile M RTA.
Details of The Wotofo Profile Squonk Mod…
As you can see this is a box mod but it is pretty versatile and can take on the jobs of 2 different devices.
You can use 2×18650 batteries and use this as a standard box mod with 5-200W variable wattage output.
Or if you just use a single 18650 you can install the 7ml capacity squonk bottle and use this as a 5-80W VW squonk mod.
The mod side panel is removable for access to the battery / squonk compartment and the bottle has a top fill cap.
Your vaping data is displayed on the 0.96in TFT colour screen and you have 7 screen theme colours to choose from.
The mod also has a USB Type C connector for emergency charging at up to 2A charge rate.
The brain of the device is the NexChip which offers plenty of user protections and a fire speed of 0.001 seconds.
There are just the two colours to choose from – Black or Gunmetal.
1* Profile Squonk Mod
1* User Manual
1* Type-C Charging Cable
1* Squonk Bottle (pre-installed)
Technical Data:
Size: 93.85(L)*44.4(W)*30(THK) mm
Squonk Bottle Capacity: 7ml
Display: 0.96 inch TFT Screen
Main Material: Zinc Alloy + PC
Connection: 510 connection
Battery Type: single / dual 18650 battery (not included)
Output Power: 5-80W in single battery mode
5-200W in dual battery mode
Maximum Output Voltage: 4.2V
Standby Current: <300uA
Pass-through Charging: Supported
Charging Current: DC 5V/2A
Charging Port: Type-C
So this dual function mod is pretty versatile and easily converted to match you needs day to day!
What do you think??