The Drag X Plus Pro Edition is a much needed update to the recent Drag X Plus.
What To Expect From The Voopoo Drag X Plus Pro Edition…
As mentioned above the original version had a restricted output due to there being no boost of the battery wattage. When the battery output wattage dropped due to the battery discharging this meant that the device could often not reach the full 100W it stated to be capable of.
With the Pro Edition an 8.5V (max) boost has been included to help achieve the higher output levels with discharging batteries.
Another update is the inclusion of the TPP 2.0 pod tank – which is an update to the previous TPP tank. Unfortunately there is no indication of what has been improved for this version as both seem to have similar specifications?
As with the rest of the Drag X range this is compatible with other TPP or PnP pods using the magnetic tank base plus the mod has a standard 510 connector for use with any 510 atomiser.
The TPP 2.0 pod tank is compatible with the TPP coil range – there are 2 coils in the range and both are included in the kit:
- TPP-DM1 0.15ohm Mesh
- TPP-DM2 0.2ohm Mesh
Pull the pod from the magnetic tank base to access the fill port and for removal / replacement of the push in coils. The tank base also houses the adjustable airflow inlet.
Looking at the other features of the mod now – this uses a single 18650 or 21700 battery which is not included in the kit. A USB Type C port is provided for emergency charging at a 2A charge rate.
The output is again specified as 5-100W in either Smart Mode (the device sets the output according to the coil installed) or RBA Mode (full variable wattage).
A GENE FAN2.0 chipset is in charge and a 0.96in colour TFT screen is located on the side of the device. You can rotate the screen display to suit.
There are 5 colours to choose from: Classic, Smoky Grey, Marsala, Prussian Blue and Sandy Brown.
-
Package Includes:
1* Drag X PLUS Professional Edition Device
1* TPP 2.0 Pod Tank
1* Type-C Cable
1* User Manuall
Size: 88.5*34.5*28 mm
Power Range: 5-100W
Capacity: 5.5ml
Resistance Range: 0.1-3.0ohm
Input Voltage: 3.2-4.2V
Battery: Support 21700/18650 Battery (* Batteries not included in the package.)
Material: Zinc Alloy & Leather
Compatible Tanks: TPP 2.0 Pod Tank: All TPP Coils
Let me know if you think the Drag X Plus Pro Edition is a worthy update in the comments below!