The Vapefly Siegfried Mod Kit. The mod by itself features bypass mode, single 18650/20700/21700 battery compatibility, an LED indicator, exquisite workmanship, and a smart protection system. The kit with Siegfried RTA has a 7mL juice capacity, mesh coils, an anti-dry burn system, easy coil building in just 3 steps, and side-adjustable airflow control. This setup is for sale in stainless steel, black, and gunmetal.
Mechanical Mod w/ Exquisite Design
As soon as you see the Vapefly Siegfried, you can tell its design consists of exquisite workmanship and high-quality materials in a portable form factor. That is because the mod kit is the 5th project in cooperation with German 103 and is the result of 365 days of development. On the stainless steel chassis, there are also incredible CNC engravings that are sure to draw attention wherever you take this setup. Available in black, gunmetal or SS colors, this setup will surely withstand the test of time.
The Vapefly Siegfried works with either a 21700, 20700, or 18650 battery, all of which will ensure continuous power supply. To track the charge level of this cell which is inserted via a bottom screw cap, there is a LED indicator on the power button. A green light indicates the charge level is above 3.8 volts, a blue light above 3.4 volts, and a red LED means you should recharge the battery with an external charger. Built with a 3S chipset, there are a ton of safety features, but the mod is not regulated and only works in bypass mode. This means that performance depends solely on the charge level of the battery. Finally, for security, there is short circuit, reverse battery, over-current, high temperature, and 10 seconds cutoff protection. Plus, the chipboard features nano-coating to avoid damage from water of e-liquids.
7mL RTA w/ Easy Mesh Coil Building
The RTA in the Vapefly Siegfried Kit works hand in glove with three different types of mesh coils: a 0.2ohm M1 Mesh Wire Ni80 (50 to 60 watts), a 0.2ohm M2 Mesh Wire KA1 (50 to 60 watts), or a 0.18ohm M4 Grid Mesh Wire KA1 (50 to 65 watts). Building a coil is also quite effortless as it takes only 3 steps: construct your coil, lay the cotton onto the deck, and cut the cotton to the correct size. Perhaps the best aspect of this process is that there is no leaking because you don’t actually put the cotton into the wicking slot. It is also important to note that the build deck has only a single coil configuration and that you should use the included Firebolt M cotton which is specifically designed for the Siegfried Mesh RTA Kit. Best of all, an anti-dry burn system means there’s a larger contact area between cotton, yet e-juice is transferred faster and over a shorter distance for incredible vapor production.
With the same material and craftsmanship, the Siegfried RTA is an ideal match for the previously discussed mod. This atomizer can also hold up to 7mL of e-liquid and is easily refilled via a top-fill method. Moreover, side-airflow from dual air intakes are fully adjustable and provide excellent flavor and huge vapor. At the top of the Vapefly Siegfried, you can see a magnificent 810 drip tip but unfortunately, a 510 drip tip adaptor is not included with purchase.
Vapefly Siegfried Features & Specifications (Kit)
1. Designed by German 103 & Vapefly2. Anti dry burn system
3. For both mesh coil and normal single coil
4. Side airflow brings huge cloud and fabulous flavor
5. Top filling with 7ml big capacity
6. Single 21700/18650/20700 cell compatible
7. LED lighting indicates battery life
8. 3S chip smart battery protection
In The Box
1 x Siegfried Mesh RTA
1 x Prebuild Coil
4 x Mesh coil（Ni80,KA1）
2 x Firebolt M cotton
1 x Glass tube
1 x User manual
3 x Screws
1x O-rings
1 x Screw driver
1 x Coil Rod
1 x German 103 Card
1 x Siegfried Tube Mod
1 x 18650 battery adapter
1 x User manual
1 x Safety card
1 x Warranty card
