Uwell Whirl 2 Kit. The Whirl 2 Mod features 18540/20700/21700 battery support, fast firing, 100 watts of power, bypass mode, power mode, TCR mode, three temperature control modes, 2 amp fast charging, and a wide range of safety protections. The Whirl II Tank has a 3.5mL capacity with easy top-fill method, a DTL coil, an MTL coil, and adjustable airflow control. This kit is for sale in black/red, black, blue, or silver.
Although very little has been released in regards to the Conick Box Mod that is included with the Whirl II Kit, what we do know is that it works with three different types of batteries, including a 21700 cell that should result in long vape times at the maximum 100-watt setting. However, when using a smaller 18650 battery, you’ll need to insert the included battery sleeve into the battery bay that is accessible by a flip cover at the bottom. A 2 amp micro USB charging system at the bottom of the control face permits for for a fast recharging process and you’ll find a compatible cable in the package.
Inside the Uwell Whirl 2 Kit, there’s a moisture-proof chipset that effectively protects the electronics, so you can feel safe using this setup in the rain or dusty environments. Moreover, the chipset permits for fast 0.008 second firing and also a safe vape experience thanks to six protections. These include high temperature, short circuit, over-discharge, overcharge, reverse polarity, and over-puff protection. And, for versatility, the chipboard allows operation in bypass, temperature control, variable wattage, and TCR modes.
With dimensions of 87mm by 35mm by 29.6mm and a zinc alloy chassis, the Uwell Whirl 2 Kit’s mod is both small and lightweight for easy transportation. At the top, there’s a 510 connector, while the battery bay can be accessed at the bottom, as previously discussed. On the control face of the Conick Mod, you can see a 0.69″ OLED display screen with monochrome UI and vape indicators that include the current mode, the current wattage/temperature, the current voltage, the atomizer coil resistance, a battery bar, and battery percentage. To navigate the menu, there are three buttons as well as a select button in the middle. This means setting adjustments and menu navigation are straightforward.
3.5mL Tank For DTL or MTL Vaping
If you purchase, the Whirl II Kit, you’ll receive a tank that features a 3.5mL juice capacity and a smooth refill system. To add juice, simply unscrew the top cap to uncover a decent-size port. Moreover, the Uwell Whirl 2 Kit can be used as a mouth-to-lung or direct-to-lung vape system by adjustment of two bottom airflow slots, as well as two different coils. If you enjoy a nicotine salt style MTL vape, you should install the included Single Nichrome 1.8ohm coil that operates from 10 to 15 watts. For DTL vaping, you can open the air slots all the way and station the Dual Nichrome 0.6ohm coil that works from 18 to 22 watts. Finally, there’s no intricate or messy coil installation process as the coils can be simply pushed in or pulled out.
Uwell Whirl 2 Kit Features & Specificatons
Technical Data:Tank Material: Stainless Steel, Pyrex
Size: Φ25mm × H46mm
Tank Capacity: 3.5ml
Coil Specifications: Dual NiChrome 0.6ohm Coil (suggested 18-22W), Single NiChrome 1.8ohm Coil (suggested 10-15W)
Mod Material: Zinc Alloy, Aluminum Alloy
Mod Size: 87*35*29.6mm
Battery Type: Single 18650/20700/21700 battery (not included)
Power Range: 5-100W
Mod Resistance Range: 0.1ohm-3ohm (VW)/0.1ohm-1ohm (TC)
Temperature Range: 200℉-600℉/100℃-315℃
Color: Silver, Blue, Black, Red
Package Includes:
1* Conick Mod
1* 18650 Battery Sleeve
1* Micro USB Cable
1* Whirl II Tank
1* 1.8ohm Coil (Pre-installed)
1* 0.6ohm
1* Drip Tip Cover
1* Extra Glass Tube
1* Pack of Replacement O-rings
1* User Manual
