The SXmini SX Nano kit is the latest release from this popular brand which has similar features to the X Class mod.
SXmini have been pretty quiet lately but have enjoyed past success with their devices including the SL Class and M Class.
More Details On The SXmini SX Nano Kit…
The functions of this kit are very similar to the Pioneer 4 You IPV V3 Mini kit and the VSticking VKsma.
Controlling the mod is the YiHi SX681J chipset which is slightly different to the IPV version but performs similar processes.
This is a squonk mod and the ESS driver system (Electronic Spray Squonk) monitors the temperature of the coil. If the coil is hotter than it should be – denoting a dry coil – the chip instructs the bottom feed system to spray e-liquid into the atomiser.
Inside the mod is the 900mAh battery which charges at a 1A charge rate via the USB Type C port in around 60 minutes.
Believe it or not the power output and user modes are not mentioned at all!
Sitting on top of the mod is a strange atomiser which is similar to an RDA but without the fully rebuildable qualities!
The atomiser is called an “ADA-V2” (ADA= Auto Dripping Atomiser) which comes in a 0.6ohm version only which is included in the kit with a spare disk coil. This is also used on the SX Auto Pod Kit.
There are 5 colours to choose from: Blue, Red, Black, Gunmetal and Green.
Kit Includes
-
1* SX Nano Device
1* 0.6ohm SX-ADA V2 Atomizer Set
1* 0.6ohm Disk Coil
2* Reservoirs
1* USB Type C Cable
1* User Manual
1* Warranty Card
Device size: 87.4*39*17.9mm
Battery capacity: 900mAh
Reservoir capacity: 2ml
Reservoir material: PETG
Max Charge: 5V/1A
60 min to full charge
Quiescent Current <3 uA
ADA mode supported coils: SX ADA v2 0.6ohm
There are quite a few details missing on the SXmini website and considering this has been in testing for a year they had plenty of time to add all the info!