Smok, a very classic brand, recently launched 2 new products - Smok RPM 5 & RPM 5 Pro are two new pod kits, let's get to know them:
The RPM range has been steadily growing from the original RPM 40, then onto the RPM 80, RPM 80 Pro, followed by the lovely RPM Lite, RPM 160, RPM 2, RPM 2S and then the RPM 4.
More Details On The Smok RPM 5 & RPM 5 Pro Kits…
As you can see these are Pod Kits and the two main components are the pod (or Tank) and the Battery section.
The main difference between the RPM 5 and RPM 5 Pro is the battery.
The RPM 5 has an internal 2000mAh battery whereas the RPM 5 Pro uses a single 18650 battery which is not included.
Both devices have a USB type C port which charges at up to 1.4A charge rate.
Output wise both devices are the same with a Variable Wattage output of 5-80W (0.8-4V).
A 0.96in colour TFT screen is provided to view all of your vaping data.
An airflow slider switch is provided to give you full control of the incoming air.
The pod is removable and refillable via the slide top cap.
In the standard kit this has a massive 6.5ml capacity.
This uses the new RPM 3 range of coils – there are 2 resistances – 0.15ohm and 0.23ohm and both are included in the kit.
Package Includes:
SMOK RPM 5 Kit:
1 * SMOK RPM 5 Device (2000mAh)
1 * SMOK RPM 5 Pod (RPM 3 Meshed 0.15ohm Coil Pre-installed)(6.5ml)
1 * RPM 3 Meshed 0.23ohm Coil
1 * Type-c Cable
1 * User Manual
SMOK RPM 5 Pro Kit:
1 * SMOK RPM 5 Pro Device
1 * SMOK RPM 5 Pod (RPM 3 Meshed 0.15ohm Coil Pre-installed)(6.5ml)
1 * RPM 3 Meshed 0.23ohm Coil
1 * Type-c Cable
1 * User Manual
Technical Data:
Size: 89.2 * 29.5 * 31.2mm
Battery Capacity: 2000mAh (RPM5), single 18650 (not included)(RPM5 Pro)
Power Range: 5W-80W
Input Voltage: 3.3V-4.2V
Output Voltage: 0.8V-4.0V
Standby Current: <100uA
Resistance Range: 0.15ohm-0.2ohm
Charging Voltage: 5V±0.2V
Charging Current: Max 0.4A
Over-charging Current: 2A±0.6A
Over-discharging Voltage: 2.4V±0.05V
Let me know what you think of the Smok RPM 5 & RPM 5 Pro in the comments below!