The Smok RPM 4 Kit is the latest in the “RPM” range of pod kits.
So far we have had the RPM40, RPM80 Pro, RPM Lite, RPM2, RPM2S and the massive RPM160 kits!
More Details On The Smok RPM 4 Kit…
Inside the mod is a 1650mAh battery which is recharged via the USB Type C port at a fast 1.5A charge rate.
The output is variable and you can select anywhere between 5-60W.
A 0.96in colour TFT screen displays all your vaping data and you can change the colour theme.
On the rear of the mod is the very welcome airflow slider switch to tailor the airflow to your preference and the coil you have installed.
When it comes to pods – these are refillable and the coils are removable and replaceable.
You get 2 pods in the kit – both compatible with different coil ranges:
- RPM4 LP2 pod – this uses the new range of LP2 coils
- RPM4 RPM pod – this uses the existing range of RPM coils.
There are 2 different LP2 coils available a 0.23ohm meshed coil which is included in the kit and a 0.6ohm dual wire coil which is available separately.
When it comes to the RPM coils there are lots to choose from – you get the 0.4ohm RPM Mesh coil with the kit. The other RPM coils shown below are also compatible…
A side refill port is provided and in standard form the pods will hold 5ml of your own e-liquid. In TPD regulated areas this capacity is reduced to 2ml.
A clear area on the pod gives a viewing window to see your e-liquid level and the pod is secured in the mod using a magnetic connection.
There are 10 colour options to choose from in 2 ranges…
Regular Range: Black, Pale Champagne, Rose Gold, Silver Red, Silver Blue and Cyan Pink
Leather Range: Black Leather, Red Leather, Blue Leather and Brown Leather.
1 x SMOK RPM 4 Device (1650mAh)
1 x SMOK RPM 4 LP2 Pod (LP2 Meshed 0.23ohm DL Coil Preinstalled) (5ml)
1 x SMOK RPM 4 RPM Pod (RPM Mesh 0.4ohm Coil Preinstalled) (5ml)
1 x Type-C Cable
1 x User Manual
Smok RPM 4 Kit Specs
Size:103mm(Height)*25mm(Thickness)*27.9mm(Width)
Battery Capacity:1650mAh
Power Range:5W-60W
Standby Current:<100uA
Input Voltage:3.3V-4.2V
Output Voltage:0.8V-4.0V
Resistance Range:0.2ohm-2.5ohm
Charging Voltage:5V±0.2V
Charging Current:Max 1.5A
Overcharge Voltage:4.3V±0.05V
Overcharge Current:2A±0.6A
Over-discharge Voltage:2.4V±0.05A
Screen:0.96inch TFT Color Display Screen
Charging Port:Type-C Port
Pod Type:RPM 4 LP2 Pod - Compatible with two LP2 coils
RPM 4 RPM Pod - Compatible with all RPM coils
Pod Capacity:5ml
Filling:Side Filling
Lots of good updates here, the airflow slider and clear pod viewing window are my favourites!
Let me know what you think of the Smok RPM 4 Kit in the comments below!