The Smok Pozz Pro Kit is an update to the earlier Smok Pozz X pod kit.
What Is New For The Smok Pozz Pro Kit?
Comparing the Pozz Pro with the earlier Pozz X there are a few changes.
For a start the Pro version actually has a smaller battery at 1100mAh compared to the Pozz X at 1400mAh.
There is a USB Type C port for charging which has a 0.98A max current rating and Smok say this can be fully charged in 90 minutes.
The output on the Pro is lower too it is stated as 5-25W variable wattage, whereas the previous version was 5-40W.
Another downgrade is the screen – the original had a 0.96in colour TFT display whereas the Pro has only a 0.69in OLED screen. But this should still do the trick!
You can use the fire button or the auto draw feature will allow you to inhale on the mouthpiece and the device will automatically fire itself.
A great upgrade though is the airflow adjustment – on the X it was located on the base of the coil however now you have a slider lever on the actual mod itself.
Pod wise this uses the LP1 range of coils which are removable and replaceable.
You get 2 of the LP1 Meshed 0.9ohm coils in the kit – one of them is already installed.
This is refillable via the side fill port with up to 2.6ml (standard) or 2ml (TPD) of your own e-liquid.
There are 8 colour options to choose from: Silver Black Alloy, Silver Red Alloy, Green Blue Alloy, 7-colour Alloy, Black Alloy, Red Stabilising Wood, Fluid Black Grey and Fluid 7-colour.
Package Includes:
1* Pozz Pro Device (1100mAh)
1* Pozz Pro Pod 2.6ml (LP1 Meshed 0.9ohm MTL Coil Preinstalled)
1* LP1 Meshed 0.9ohm MTL Coil
1* Type-C Cable
1* User Manual
1. Adjustable airflow: 4 levels of the airflow
2. Power adjustable: 5W-25W
3. 0.69 inch OLED screen
4. Compatible with LP1 coil
5. 1100mAh built-in battery
6. Button-triggered or air-activated
7. 90min charging for all-day vaping with type-c port
8. Three silicone rings on coil to prevent leakage perfectly
9. Multiple protections: Overtime/Low Voltage/Atomizer Detection/Overcharge/Short Circuit/Over-discharge Protection
Technical Data:
Size : 106.5*29*12.5mm
Battery Capacity: 1100mAh
Power Range: 5W-25W
Standby Current: ＜50uA
Input Voltage: 3.3V-4.2V
Output Voltage: 1.5V-4.0V
Resistance Range: 0.6ohm-2.5ohm
Charging Voltage: 5V±0.2V
Charging Current: Max 0.98A
Over-charging Voltage: 4.3V±0.05V
Over-charging Current : 1.75A±0.6A
Over-discharging Voltage: 2.4V±0.05V
E-juice Capacity: 2.6ml(standard)
Screen: 0.69 inch OLED screen
Let me know what you think of the Smok Pozz Pro Kit in the comments below!