A representative of a tight cigarette puff - Vapefly Alberich MTL RTA. The last Vapefly cigarette atomizer up to this point was introduced almost two years ago. Now let's see it:
From the appearance of the novelty, it again blows German roots, however, its name is appropriate. The strict angular design is only diluted with a "colored" flask, otherwise it is a "chopped with an ax" tank with numerous decorative elements. The latter includes a special form of drip type and a stepped top, etc. The dimensions are the most tank - standard diameter and average height.
The capacity at such a height is not the most enviable, but it can be increased by 30% with the help of a complete flask with a larger capacity and a shaft extension. You attention to the fact that both complete flasks are plastic.
In addition, the manufacturer has prepared glass options for a separate sale.
It will please with its "modernity" or, better to say, the mass use by "most" manufacturers in recent times. Inside we see a pair of racks, designed for the correct fixation of one spiral wound in any direction. The screws are massive, there are limiters on both sides of them. Cotton is placed in special ditches and fed from above through small holes.
Cooling of the coil is classic - lower - implemented using a system of interchangeable nozzles of different throughput. The kit provides six options at once, including not quite cigarette ones - 0.8 / 1.0 / 1.3 / 1.6 / 2.0 / 2.5mm. Moreover, these same nozzles are positive pins and can be replaced with a hot one, that is, with a fully serviced, assembled and filled tank.
At the bottom, there is one single air intake hole. This means that the adjustment of the intensity of the puff is realized exclusively with the help of the aforementioned nozzles.
Technical Data:
Diameter: Φ22mm
Drip Tip:510
Capacity:3ml/4ml
Filling:Top filling
Airflow:Bottom airflow
Airflow Pin:0.8mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm, 2.5mm
Coil Rebuildable: Single coil
Package Includes:
1* Vapefly Alberich MTL RTA
1* 4ml PEI Tube
1* Adapter
1* 0.8Ω KA1 Prebuilt Coil
2* Firebolt Cottons
5* Airflow Pins
4* Screws Orings
More Details: Vapefly Alberich MTL RTA