The Sigelei FOG 213 Kit is an update to the 213 range which used to have the “Fuchai” badge.
So the “Legend” is back – the new 213 Fog mod is paired with the new “Fog” pod/tank which is also used in the Humvee 80 kit.
The mod is pretty similar design wise to its predecessors, with the offset screen and button layout.
You will need 2×18650 batteries to power the device which as usual are not included.
If you need to recharge on the go it is equipped with a USB Type C port which has “Flashtech supercharge” – the charging rate is not stated.
You get a variable wattage adjustment from 5-213W plus a “Smart mode” which apparently sets the power automatically to match the installed coil, plus if you simply remove the tank without changing the coil the previous power setting is remembered.
A colour 0.92in TFT screen located on the front displays all of your vaping data.
The Fog Tank/pod uses the FOG range of coils – there are 3 coils in the range:
- 0.15ohm Mesh (available separately)
- 0.2ohm Mesh (included in kit)
- 0.3ohm Mesh (included in kit)
The pod base houses an adjustable airflow ring and the fill port is located on the underside.
You also get a 510 adaptor to allow other 510 atomisers to be used on the mod.
There are 4 colours to choose from: Black, Graphite, Blue and Red.
1* Sigelei 213 fog Mod
1* Fog Tank(0.3ohm)
1* Fog Coil(0.2ohm)
1* 510 Adapter G
1* USB Cable
1* Manual Checking
1* Warranty Card
Capacity: 5ml
Mod Material: Zinc Alloy & Aluminum Alloy
Pod Material: PCTG
Battery: Dual 18650 batteries(not included)
Output Voltage: 1-8.4V
Output Wattage: 5-213W
Operating modes:Power | TC SS | TC ti | TC Ni | TCR
Resistance Range: 0.1-3.0ohm
Modes: VW Mode, TCR Mode, and Bypass Mode
Display: Full-color 0.92″ TFT display
Resistance: FOG 0.15ohm mesh coil(60-80W)
FOG 0.2ohm mesh coil(40-60W)
FOG 0.3ohm mesh coil(32-40W)
So the 213 has been updated to incorporate the new “FOG” pod/tank thingy.
Do you like the updates?