The kit uses the Wasp Nano RDA (Single not dual version) as its platform but is slightly different – read on to find out why.
What To Expect From The Oumier Wasp Nano Stick RDA Kit?
This is an All In One (AIO) kit – which basically means the tank and battery section are only compatible with each other. For instance you cannot use the RDA on another mod or the mod with another tank.
As you can see the light up body of the device is the main marketing feature and you can select from a Red, Blue, Green, Purple or Yellow light colour.
The mod contains a 2000mAh internal battery which is charged via the USB Type C port – the charge time and rate are not specified.
Also not specified is the actual output – so I can only assume this gives full battery power?
A fire button with LED indicator is provided – I am not sure if the LED can display the battery capacity remaining or just lights when firing?
The build deck is actually part of the mod – instead of being a separate component as found with the original Wasp Nano RDA.
This is for single coil builds with the easy access posts and clamps that allow you to simply slide the coil legs in and access them for trimming.
The top cap of the RDA section is removable and as this is a Dripper there is no tank – you just add e-liquid as you need.
Inside the box are plenty of contents to get you up and running including coils, screwdriver and cotton.
I think you can rotate the top cap to open and close the side airflow inlets as required. But again this is not clearly specified.
Here is an introduction video from the Oumier YouTube channel.
There are 3 colours to choose from: Gold, Stainless Steel and Black.
1* Wasp Nano Stick Device
2* Silicon ring
1* Cotton
1* User Manual
2* Coils
1* Screwdriver
1* Type-C Cable
1* Warranty Card
2* Screws
Size: 24* 105mm
Charging: Type-C USB Port
Battery Capacity: Built-in 2000mAh 18650
Light colors: Red, Blue, Green, Purple, Yellow
Hmm what do you think of the Oumier Wasp Nano Stick RDA Kit? Let me know in the comments below!