The Oumier Wasp Nano RTA V2 is the update to the original Wasp Nano RTA.
The Wasp range have been very popular – the original Wasp Nano RDA was a teeny little flavour chucker which was followed by the Wasp Nano RDTA, Wasp Nano Squonk Kit and the Wasp Nano MTL RTA.
Details of The Oumier Wasp Nano RTA V2?
For a start the diameter has increased from 23mm to 24mm which should give a bit more room on the single coil build deck.
The original deck had only 2 clamps, whereas the V2 has 4 clamps so it can accommodate clockwise or anti-clockwise wound coils.
The capacity with the straight glass is the same at 2ml but there is also a bubble glass to take this up to 3.8ml.
Another noticeable change is the drip tip – this was originally part of the top cap – but on the V2 this is a standard 810 fitment and is replaceable.
As with the original the airflow is on the tank base and is adjustable with 3 airflow inlets.
Filling is taken care of by removing the screw off top cap to access the fill ports.
There are plenty of supplies in the kit to get you up and running quickly with 2x 0.28ohm Fused coils and even the cotton to wick it with!
There are 4 colours to choose from: Stainless Steel, Black, Rainbow and Gold.
1* Oumier Wasp Nano RTA V2
6* Silicone Rings
2* Fused Coil 0.28ohm
2* Screws
1* Screwdriver
1* Cotton
1* Extra Glass
1* User Manual
Main Features:
1. Side Airflow System
2. 2ml Vape Juice Capacity
3. Support Expansion To 3.8ml
4. 24mm Diameter
5. Durable Construction
Technical Data:
Filling Type: Top Fill
Airflow: three adjustable airflow system
E-juice Capacity: 2ml
Coil: Single Coil
Drip Tip: 810
DDo you like it?? Let me know!!