The Geekvape Obelisk 65 FC & 65 Kits are two new releases in the Geekvape Obelisk range.
More Details of The Geekvape Obelisk 65 FC & 65 Kits
There are some differences to both the kits, the main one being that the 65 FC has a super fast charge facility and a different battery set up. The “FC” in the name stands for “Fast Charge”.
The Geekvape Obelisk 65 FC uses the PD charging protocol. To get the full benefit you will need a 3A wall plug adaptor and cable (not included). Using a lower wattage adaptor (1A, 2A or PC USB) will give a slower charging rate. This PD protocol will output higher charge rates (up to 45W/15V Max) and can adjust the rate according to the battery being charged. Apparently it can take only 18 minutes to fully charge this using the fast charge system.
The fast charging systems allow for fast charging plus the two way flow of power. This means that the USB C port on the mod can also be used as a “Power bank” to charge other devices such as another vape or phone using the included USB C to USB C cable. This is available using the “OTG” (On The Go) user mode.
If you have the standard (non FC) Obelisk 65 this has a 2A USB Type C charging system.
As expected the battery types and configuration will differ between the two kits, the Obelisk 60 has a 2500mAh internal battery and the Obelisk 65FC has 2 x 1100mAh batteries.
The output for both kits is 5-65W with Variable Wattage, SMART, Temperature Control, VPC (custom curves), Bypass and OTG (FC Version only) user modes.
A 0.96in colour TFT screen is provided to view all of your vaping data.
The pod uses the existing Geekvape B Series coils (also used in Aegis Boost, Boost Plus, Z Nano Tank and Z50 Kit). You get the 0.2 and 0.4ohm included in the kit.
You have an airflow adjustment ring located on the pod and as the airflow enters above the e-liquid level there should be less chance of any leaks.
The fill port is also located on the top of the pod and you can refill with up to 4.5ml (standard) or 2ml (TPD regulated areas) of your own e-liquid.
There are 7 colours to choose from: Lava, Peacock, Navy Blue, Sapphire, Ruby, Scarlet Blue and Rainbow.
Kit Includes
Geekvape Obelisk 65FC Kit
1* GeekVape Obelisk 65 FC Device
1* GeekVape Obelisk 65 Pod (4.5ml)
2* GeekVape B Series Coil(Preinstalled Coil: 0.2ohm 50-80W, Spare Coil: 0.4ohm 25-35W)
1* Coil Tool
1* Spare Parts Pack
1* USB-C to USB-C Charging Cable
Geekvape Obelisk 65 Kit
1* GeekVape Obelisk 65 Mod
1* GeekVape Obelisk 65 Pod 4.5ml
1* GeekVape B 0.2ohm Coil, 50-58W
1* GeekVape B 0.4ohm Coil, 25-35W
1* Coil Tool
1* Spare Parts Pack
1* Type-C USB Cable
Geekvape Obelisk 65FC & 65 Mod Specs
- Size: 101x42x27mm
- Battery: 2x1100mAh 7.4Wh 7.4V (Obelisk 65FC) / 2500mAh (Obelisk 65)
- Display: 0.96in TFT colour screen
- Output: 5-65W (8V Max)
- User modes: VW, TC (SS), TCR, VPC, Bypass, Smart
- OTG charging for use as a mobile power bank (Obelisk 65FC Only)
- Type C USB charging – 2A charge rate (Obelisk 65) / Max 3A – 15W, 45W (Obelisk 65FC)
- Fast charging with additional adaptor / cable at 3A charge rate – 18 mins charge time (Obelisk 65FC)
- Temperature control limits: 200-600°F / 100-315°C
- Resistance range: not specified
- Top adjustable airflow
- Top fill port
- Pods: Refillable, Replaceable coil
- Capacity: 4.5ml (Standard)
- Coils: Geekvape B Series range
Let me know what you think of the Geekvape Obelisk 65 FC & 65 Pod Kits in the comments below!