The Geekvape G18 Starter Pen Kit as the name suggests is targeted to new vapers and those who want a simplified vape experience.
More Details On The Geekvape G18 Starter Pen Kit…
In this change of direction Geekvape have focused on simplicity promising a satisfying vape with as little faffing about as possible.
The two main components of the kit are the battery (or mod) and the tank.
The mod contains a 1300mAh battery which is a lot bigger than I expected! Charging is taken care of via the USB Type C port at a standard 0.5A charge rate. Which is a shame as USB C is capable of a lot quicker rates than this.
There are 3 output levels to select from but the actual output and method of adjusting this is not specified.
An LED indicator is provided which surrounds the fire button – but again what this displays is not specified.
I did try to download the user manual from the Geekvape website to try and answer these questions but the file turned out to be some kind of technical drawing with no information on at all.
Looking at the tank section now – this has a crystal clear construction so you should be able to view your e-liquid level clearly. It appears on the video to have a 510 base connection so it should be compatible with other 510 devices?
You can refill with up to 2ml of your own e-liquid by removing the top cap of the tank and adding e-liquid through one of the refill ports.
By turning the airflow control ring on the base of the tank you can adjust the airflow entering the device to suit your preference.
When it comes to coils these are removable and the device uses the G Series coil range which are also compatible with the Aegis Pod, Wenax Stylus and Wenax C1.
The 1.2 and 1.8ohm coils are included in the kit and are designed for high nicotine Mouth To Lung (MTL) vaping.
Here is an introduction video from the Geekvape EU YouTube channel.
There are 8 colours to choose from: Stainless Steel, Black, Wood, Royal Blue, Malachite, Aqua, Scarlet and Rainbow.
Kit Includes
-
1* G18 Mod
1* Atomizer(2ml)
2* Geekvape G Series MTL coil(Pre-installed: 1.2Ω, Spare coil: 1.8Ω)
1* USB Type-C Cable
Geekvape G18 Starter Pen Kit Specs
-
Battery: built-in 1300mAh battery
Charging Voltage: 5V土5%
Recharging Current: 700mA士50mA
Charging Port: TYPE-C
Stand-by Current: Quiescent Current≤15uA
Operating Temperature: 0-45℃
Capacity: 2ml
Oil injection Method: Repeatable oil injection
Resistance: 1.2Ω(8-12W)
1.8Ω(7-9W)
Let me know what you think of the Geekvape G18 Starter Pen Kit in the comments below!