The Aspire Cloudflask S Kit is an update to the Cloudflask kit.
What To Expect From The Aspire Cloudflask S Kit…
The first big change is the material the mod is actually made of.
The original was made of Stainless Steel whereas the “S” version is now Aluminium.
Also the size has changed with the height of the S being greater but the rest of the dimensions are smaller.
As with the original there is a 2000mAh internal battery and this is charged via the USB Type C port at up to 2A charge rate.
Output wise this still uses a By-pass output – basically the output depends on the battery charge and will be higher with a fully charged battery and will drop as the battery charge decreases.
An LED indicator surrounds the fire button and this changes colour to display the battery charge remaining.
The ASP chipset provides plenty of user protections.
There is a new coil added to the kit, this still has the original 0.25ohm Mesh coil but a 0.6ohm Mesh coil has also been added.
Although the airflow is not adjustable the 0.25ohm coil offers a Direct to Lung (DTL) vape and the 0.6ohm coil is more of a Restricted DTL. 
The pod is refillable by removing from the mod and opening the fill port cover located on the pod base.
There are 5 colours to choose from: Grey Camo, Brushed Brass, Black, Green Camo and Gold Gradient.
1* Cloudflask S Device(2000mAh)
1* Cloudflask S Pod(5.5ml)
1* Cloudflask Mesh Coil 0.25ohm(preinstalled)
1* Cloudflask S Mesh Coil 0.6ohm
1* Type-C Cable
1* User Manual
1* O-rings Pack
Size: 95.8*41.3*22.3mm
Pod Material: PCTG
Pod Resistance: 0.25ohm, 0.6ohm mesh coil
Coil Material: Kanthal AF
Pod Capacity: 5.5ml
Output Mode: Bypass Output
Charging Port: Type-C
Mod Material: Aluminum
Battery Capacity: 2000mAh
Filling Type: Bottom filling
Are you tempted with the Aspire Cloudflask S Kit? Let me know in the comments below!